Trying to install an amplifier with your Ride Command System? Do it like the pros. We make it simple to get all the install parts all in one place.
*Works on 2 and 4 seat Models
Hit the links for detailed instructions:
- Triple Amp Mount Instructions
- Ride Command Add an Amp RCA Harness Instructions
- Ride Command Harness With Remote Output Instructions
- Ride Command Harness With Regulated Remote Output Instructions
- Power Harness Instructions
Factory Ride Command Plugs:
Factory Plug AMP1 (they are labeled) is the front output, full range. Controlled by “front” on Ride Command
Factory Plug AMP2 (they are labeled) is the rear output, full range. Controlled by “rear” on Ride Command. *Tip! For Installs where you are installing a sub woofer but do not have a sub control knob and you do not need a front to rear fader for the highs, you can use the rear output as a sub channel. Then by fading front to rear you have some control over the level of the sub woofer. So fading to front produces less sub output, and fading to rear produces more sub output by lowering fronts.
Factory Plug AMP3 (they are labeled) full range output. Not independently controlled by Ride Command, no on screen adjustments. This is a good option for sub woofer.
|RZR XP 1000||✔||✔||✔|
|RZR XP Turbo||✔||✔||✔|
|RZR XP Turbo S||✔||✔||✔||✔|
|RZR XP Turbo Dynamix Edition||✔||✔||✔|
|RZR XP 4 1000||✔||✔||✔|
|RZR XP 4 Turbo||✔||✔||✔|
|RZR XP 4 Turbo S||✔||✔||✔||✔|
|RZR XP 4 Turbo Dynamix Edition||✔||✔||✔|
|RZR XP 1000 Trails and Rocks||✔||✔||✔|
|RZR XP 1000 High Lifter||✔||✔||✔|
|RZR XP 4 1000 High Lifter||✔||✔||✔|